For a durable roof that withstands severe storms, choose a complete storm-focused roof system, not just a shingle. The best setup usually includes architectural or impact-rated shingles, or standing seam metal, plus a sealed or well-protected deck, stronger roof edges, correct starter and ridge materials, balanced ventilation, and careful flashing.
Relevant services
Start with the system, not only the shingle
Storm performance depends on how the roof is assembled. A premium shingle installed over weak decking, poor ventilation, bad flashing, or loose edges can still fail.
IBHS FORTIFIED guidance focuses on stronger edges, roof deck protection, and tested roof covers because wind often starts damage at vulnerable areas before the whole roof is affected.
Good material choices for storm exposure
- Architectural shingles with strong wind warranty terms when installed with the required accessories.
- Impact-rated shingles where hail exposure and insurance requirements justify the upgrade.
- Standing seam metal for homeowners who want a premium long-life system.
- Synthetic underlayment, leak barrier, and properly installed starter and ridge cap.
- New flashing where old chimney, wall, valley, or skylight details are weak.
What Rhino looks for after storm exposure
Rhino starts with documentation. We look for lifted shingles, creased tabs, missing seal, hail bruising, damaged ridge, compromised pipe boots, exposed fasteners, soft decking, and water paths around flashing.
If replacement makes sense, the recommendation should explain the material, the accessory system, the ventilation plan, and the warranty terms. If repair is enough, the scope should be clear and targeted.